7 Inch 1080P Waterproof Rear View Camera with Monitor Kit L70058
Cigarette lighter to power the whole system, installation is very easy! Connect the camera to 12V-24V, it can be used as a full-time rearview monitor, it can also be used as a security monitor. When you connect the camera to the reversing light, it can be used as a car backup monitor. According to your wish, you can only replace the monitor in the kit or increase the number of cameras/change other cameras, without having to replace the whole set, and you don't have to worry about whether the new camera and the new monitor are compatible with each other. Troubleshooting: 1:The monitor shows a blue screen and no signal: 2:Perform a hard reset, unplug all cables and power cords and leave them for 1 minute, then plug them back in. 3:Check that the connection to the camera is established. There is no image on the screen: 1:Check that the camera is in the correct camera input 2:Make sure the cable is connected to the monitor 3: Make sure the camera is connected to the cable SPEC: 7-inch screen Size: 173 * 113MM Video input: AV1 / AV2 (AV2 reverse priority) 3 ways of installation: A, desktop (first remove the protective frame outside the monitor); B, hanging suction cup; C, integrated Contrast ratio: 500: 1 Voltage: 9-35V Reversing camera (18 infrared lights) Chip: CMOS 7440 Water-resistant: IP68 Packing list: 7-inch monitor * 1 rearview camera * 1 bracket * 1 suction cup * 1 sticker * 1 cigarette lighter * 1 video cable * 1 accessories * 1